BDFPZ - SODIUM HYDROXIDE TECH

  • MSDS: BDFPZ
  • Manufacturer: CONTINENTAL CHEMICAL CORP
  • Product Name: SODIUM HYDROXIDE TECH
  • National Stock Number: 6810-00-174-6581
Product Identification

Product ID:SODIUM HYDROXIDE TECH
MSDS Date:01/01/1985
FSC:6810
NIIN:00-174-6581
MSDS Number: BDFPZ

Responsible Party
CONTINENTAL CHEMICAL CORP.

Emergency Phone: 812-235-8035

Cage: 23894

Contractor
CONTINENTAL CHEM CORP
TERRE HAUTE, IN US

Cage: 23894

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: 100%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:IMMEDIATE DESTRUCTION OF TISSUE.

First Aid

First Aid:EYES:IMMED FLUSH ENTIRE EYE SURF W/PLENTY OF H*2O FOR @ LEAST
15 MIN. GET MED ATTN. SKIN:WASH W/PLENTY OF H*2O & IF POSS RINSE
W/VINEGAR/DILUTE 3% ACETIC ACID SOL. RMV CONTAM CLOTHES & SHOES.
GET MED ATTN. INHAL:START ARTIFICAL RESP (SEE SUPP DATA)

Fire Fighting

Flash Point:NONE
Extinguishing Media:DOES NOT BURN OR SUPPORT COMBUSTION
Fire Fighting Procedures:NONE

Accidental Release

Spill Release Procedures:SHOVEL UP ALL POSSIBLE MATERIAL AND
RECONTAINERIZE. FLUSH WITH LARGE QUANTITIES OF H*2O. NEUTRALIZE
WITH DILUTE ACID.

Handling

Handling and Storage Precautions:CONSIDERABLE HEAT IS GENERAL WHEN H*2O
AND CAUSTIC SODA ARE MIXED; BOILING AND SPATTERING OF HOT CAUSTIC
SOLUTION MAY RESULT.

Exposure Controls

Respiratory Protection:DUST RESPIRATOR
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:RUBBER BOOTS AND APRONS
Supplemental Safety and Health
VAP PRESS:0.01 @ 20C. SOL IN H*2O:42G/100CC @ 0C. EMER/FIRST AID
PROC:IF BREATHING STOPPED. GIVE O*2. GET MED ATTN. INGEST:DON'T
INDUCE VOMITING. GIVE LARGE AMTS OF H*2O/MILK. GET MED ATTN.

Chemical Properties

HCC:C2
Boiling Pt:B.P. Text:2534F,1390C
Spec Gravity:2.13
Evaporation Rate & Reference:0 (ETHER)
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE SOLID, FLAKE/GRANULAR, PRACTICALLY ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
ALUMINUM, TIN, LEAD, ZINC, + THEIR ALLOYS. ALL ACIDS

Disposal

Waste Disposal Methods:DISPOSE IAW FEDERAL, STATE, AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.